Descripción
The 450mAh 15.2V 95C 4S HV Lipo Battery comes in a very lightweight and very compact size. The long shape of this battery makes it works best on H frame UAV , BETAFPV 2S WHOOP, iFlight CineBee 75HD or tiny whoop FPV racing drones.
The 450mAh 15.2V 95C 4S HV Lipo Battery is packed with vibration-proof & fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. Tattu batteries are specifically made for UAV/FPV market. It is coming in a lighter weight, smaller size simpler design but more flight time and more enjoyment.
Note: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.
Features:
- Remarkable stacking technology enables single-cell capacities of 450mAh.
- High discharge performance and high energy density.
- Superior Japan and Korea Lithium Polymer raw materials.
Specifications:
- Minimum Capacity: 450mAh
- Configuration: 4S1P / 15.2V / 4 Cells
- Discharge Rate: 95C
- Net Weight(±20g): 49g
- Dimensions: 62.32mm Length x 16.59mm Width x 26.7mm Height
- Charge Plug: JST-XHR-5P
- Discharge XT30
Applications
Multirotor FPV, such as 150-sized micro H-frame quad!
Lipo Battery Safety
- Batteries should NEVER be left unattended while charging.
- Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
- Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
- Do not charge batteries near flammable items or liquids.
- Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
- Never charge inside an automobile even when parked.
- KEEP BATTERIES AWAY from children and pets at ALL times.
- Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
- Battery may explode if damaged or disposed of in fire
- Never leave batteries inside a car on a hot day or any other place where the temperature may exceed 140F / 60C.
- Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
- Immediately discharge damaged batteries at 1/2 C rate and dispose
- Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
- Take care that the cells are not punctured, especially by metallic objects like hobby knives.
- If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.