Description
TATTU is a popular battery brand for drones, The Tattu 22000mAh 4S 14.8V 25C LiPO battery pack with XT90-S plug with the compact size and lightweight is the best choice to match DJI S1000+.
Less is more as the slogan: the single cell is 22000mAh, each cell connected in series, it is less in the whole industry, but TATTU is committed to providing more clients the perfect flight experience, no matter in the field of aerial photography drone, agriculture spraying drone, mapping and surveying drone, eVTOL, transport delivery, rescue, underwater, aerial inspections, etc.
NOTE: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.
Features:
- Anti-spark
- Stable automatic stacking technology
- The most strict single cell capacity, voltage, resistance, discharge curve matching process
- Superior Japan and Korea Lithium Polymer raw materials
- Almost 200Wh/kg energy density
-
300 times cycle life
Specifications:
- Minimum Capacity: 22000mAh
- Configuration: 4S1P / 14.8V / 4 cells
- Discharge Rate: 25C
- Net Weight(±20g): 2450g
- Dimensions: 213mm Length x 94mm Width x 43mm Height
- Balancer Connector Type: JST-XHR
Lipo Battery Safety
- Batteries should NEVER be left unattended while charging.
- Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
- Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
- Do not charge batteries near flammable items or liquids.
- Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
- Never charge inside an automobile even when parked.
- KEEP BATTERIES AWAY from children and pets at ALL times.
- Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
- Battery may explode if damaged or disposed of in fire
- Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
- Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
- Immediately discharge damaged batteries at 1/2 C rate and dispose
- Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
- Take care that the cells are not punctured, especially by metallic objects like hobby knives.
- If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.