Tattu 850mAh 2S 7.6V HV 95C Lipo Battery Long Pack With XT30 Plug

TattuSKU: TA-95C-850-2S1P-HV-L-XT30

Price:
Sale price$10

Shipping calculated at checkout

Stock:
In stock (24 units), ready to be shipped

Description

These Tattu 850mah 2S HV lipo batteries deliver full capacity and discharge rate. It is very compact in size and very light in weight. Works perfect with your Multirotor FPV from size 100 to 180. The 95C high C rate gives you enough power under load.

Note: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.



Tattu 850mAh 2S Battery Features:

  •  Remarkable stacking technology enables single cell capacities of 850mAh.
  •  High discharge performance and high energy density.
  •  Superior Japan and Korea Lithium Polymer raw materials.



Specifications:

  •  Minimum Capacity: 850mAh
  •  Configuration: 2S1P /7.6V / 2Cell
  •  Discharge Rate: 95C
  •  Net Weight(±20g): 40g
  •  Dimensions: 74.51mm x 16.76mm x 15.13mm (L x W x H)
  •  Charge Plug: JST-XHR-3P
  •  Discharge Plug: XT-30



Application

These Batteries Designed for Multirotor FPV from size 100 to 180, such as Owl racing quadcopter.

Lipo Battery Safety 

  • Batteries should NEVER be left unattended while charging.
  • Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
  • Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
  • Do not charge batteries near flammable items or liquids.
  • Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
  • Never charge inside an automobile even when parked.
  • KEEP BATTERIES AWAY from children and pets at ALL times.
  • Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
  • Battery may explode if damaged or disposed of in fire
  • Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
  • Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
  • Immediately discharge damaged batteries at 1/2 C rate and dispose
  • Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
  • Take care that the cells are not punctured, especially by metallic objects like hobby knives.
  • If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.

Estimate shipping

You may also like

Recently viewed