Tattu 850mAh 11.1V 45C 3S1P Lipo Battery Pack With XT30 Plug

Save 11%
TattuSKU: TA-45C-850-3S1P-XT30

Price:
Sale price$16 Regular price$18

Shipping calculated at checkout

Stock:
Contact Us

Description

Tattu 850mAh 11.1V 45C 3S1P Lipo Battery Pack With XT30 Plug

Tattu 850mAh 11.1V 45C 3S1P Lipo Battery is made for FPV fans. It comes in a very lightweight of only 76g. It also offers you 45C exposure rate, giving you enough punch no matter you are racing or freestyle.

Note: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.

Features:

  •  Remarkable stacking technology enables single-cell capacities of 850mAh.
  •  Superior cell matched consistency.
  •  Automatic production line to guarantee high quality and consistent performance.
  •  Tattu batteries provide high quality, reliable power for your Multirotor FPV 150 size.

Specifications:

  •  Minimum Capacity: 850mAh
  •  Configuration: 3S1P / 11.1V / 3 Cells
  •  Discharge Rate: 45C
  •  Max Burst Discharge Rate: 90C
  •  Net Weight(±20g): 76g
  •  Dimensions: 60mm Length x 30mm Width x 22mm Height
  •  Balancer Connector Type: JST-XHR

Lipo Battery Safety 

  • Batteries should NEVER be left unattended while charging.
  • Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
  • Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
  • Do not charge batteries near flammable items or liquids.
  • Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
  • Never charge inside an automobile even when parked.
  • KEEP BATTERIES AWAY from children and pets at ALL times.
  • Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
  • Battery may explode if damaged or disposed of in fire
  • Never leave batteries inside a car on a hot day or any other place where the temperature may exceed 140F / 60C.
  • Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
  • Immediately discharge damaged batteries at 1/2 C rate and dispose
  • Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
  • Take care that the cells are not punctured, especially by metallic objects like hobby knives.
  • If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.


You may also like

Recently viewed